Dental device cable assemblies

Handpiece cables, chair-side device leads and imaging interconnects — assemblies that are handled constantly, cleaned often, and expected to keep working.

Coiled dental handpiece cable with a multi-pin connector

How the assembly is used

Dental assemblies live in a small radius of motion. They are gripped, rotated, hung on a holder and pulled across a patient. The connector endures repeated mating; the cable endures repeated flex at a tight bend radius.

Design considerations

  • Bend radius at the handpiece end — the tightest point in the whole assembly.
  • Strain relief that survives repeated autoclave or wipe-down cycles.
  • Conductor gauge balanced against flexibility at the working end.
  • Small connector profiles where the device envelope is fixed.
  • Labeling that stays legible after cleaning.

Cleaning and sterilization compatibility depends on the materials selected. It is confirmed per project against your actual cleaning protocol.

What to send us

  • Device end and connector end drawings, or samples of both.
  • The cleaning or sterilization cycle the assembly will see.
  • Required bend life and pull force, if specified by your design team.
  • Annual volume and the device models the assembly serves.
Start a project

Send us a drawing, or a question.

Tell us what the assembly has to do. An engineer reads every inquiry before a price is given.

Start your project